ADAPTEC, INC. ACB-2370B Data bus: 16-bit, ISA Size: Half-length, full-height card Hard drives supported: Two RLL ST506 drives Floppy drives supported: None [Image] CONNECTIONS Function Location 20-pin data cable connector-drive 1 J1 20-pin data cable connector-drive 0 J2 34-pin control cable connector-hard drive J3 3-pin connector-drive active LED J5 USER CONFIGURABLE SETTINGS Function Location Setting » Hard drive port address J6 - 1 open 1F0-1F7h Hard drive port address J6 - 1 closed 170-177h » Not used J6 - 2 open » Zero wait state disabled J6 - 3 open Zero wait state enabled J6 - 3 closed » Step rate is 16 mseconds and J6 - 4 open recalibrate to 0 Step rate is 35msec. and J6 - 4 closed recalibrate to 0 minus 1 » Read ahead cache enabled J6 - 5 open Read ahead cache disable J6 - 5 closed » Not used J6 - 6 open » Not used J6 - 7 open » Hard drive Interrupt is IRQ14 J13 pins 1 & 2 closed Hard drive Interrupt is IRQ15 J13 pins 2 & 3 closed » Not used J13 pins 3 & 4 open » BIOS address C800h J14 pins 1 & 2 closed BIOS address CC00h J14 pins 2 & 3 closed BIOS disabled J14 open